The fully digitized and microprocessor-controlled MIG/MAG power source for short circuit arcs and spray arcs enables the best weld properties in every respect, and reproducible results time and time again. Very easy to operate, thanks to synergic operation: only one parameter needs to be defined (e.g. sheet thickness, welding current or wire feed speed), and the power source then falls back on its embedded expert knowledge to control the entire welding process.
• Energy-saving inverter technology
• Expansion using modules
• Microprocessor controlled
• Remote control facility
• Synergic operation - for optimum welding parameters
Reliability
• Base metals constructed of aluminum, CrNi, special metals and steel
• 88% degree of efficiency
Applications
• Manufactured for special vehicles and construction machinery
• Metal and gantry construction, fitting shops and forges
• Plant, container and machine construction, steel engineering
Specifications
Weight: 77.6 lb (35.2 kg)
Dimensions (in) H x W x L: 18.7 x 11.4 x 24.6
Dimensions (mm) H x W x L: 475 x 290 x 625
Mains Voltage: 3 x 400 V
Welding Current Range MIG/MAG: 3 - 400 A
Duty Cycle at 10 min/40°C (104°F): 50% D.C at 400 A
Duty Cycle at 10 min/40°C (104°F): 100% D.C at 320 A
Product specifications and availability may vary. |
